Pioneer Elite SC-LX704 Instruction Manual Download Page 99

Page: 99 / 225

≫

≫

≫

≫

≫

≫

AirPlay

By connecting this unit to the same network as iOS devices, such as iPhone

, iPod touch

and iPad

, you can enjoy music files on iOS devices wirelessly.

• Update the OS version on your iOS device to the latest version.

• Depending on the iOS version, operation screens or operation procedures on the iOS device may be different. For details, refer to the operating instructions for the

iOS device.

Playing Back on This Unit

Connect the iOS device to the access point where this unit is connected via

network.

2. Tap the AirPlay icon

in the play screen of the music app on an iOS device

that supports Airplay and select this unit from the list of devices displayed.

Play the music file on the iOS device.

• If "System Setup" - "Hardware" - "Power Management" - "Network Standby" is

set to "Off " in the Home, manually turn the unit on and then press NET on the

remote controller. In the factory default setting, the Network Standby function

(

p169

) is set to On.

• Due to the characteristics of AirPlay wireless technology, the sound produced

on this unit may slightly be behind the sound played on the AirPlay-enabled

device.

You can also play the music files on a PC with iTunes (Ver. 10.2 or later)

equipped. Confirm that this unit and the PC are connected to the same network

beforehand. Then, press NET on the remote controller. Next, click the AirPlay

icon

in iTunes, select this unit from the displayed devices, and start play of a

music file.

iPhone

Pioneer SC-LX904 XXXXXX

Wi-Fi

e.g., iOS 10

Summary of Contents for Elite SC-LX704


































































































































































































































Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands

Pioneer Elite SC-LX704, Instruction Manual

Search results

Summary of Contents for Elite SC-LX704

Reviews:

Related manuals for Elite SC-LX704

Brands by name

Popular brands