Pioneer DVR-440HX-S, Operating Instructions And Owner'S Manual

Page: 153 / 172

Additional information 17
153
En
Chapter 17
Additional information
Setting up the remote to
control your TV
(DVR-940HX-S)
You can use the supplied remote to control
your TV. To be able to use this feature you
first have to program the remote with a
maker code from the table below.
1 Press and hold down the CLEAR
button, then enter the maker code for
your TV.
See the table on the following page for the
list of maker codes. If there is more than one
code given for your make, input the first one
in the list.
• If the maker’s name of your TV doesn’t
appear in the table below, you will not be
able to use this remote to control your
TV.
2 Press to check that the remote
works with your TV.
If the remote is set up correctly, the TV
should switch on/off. If it doesn’t and there is
another code given for your maker, repeat
step
1 with a new code.
Using the TV remote control
buttons
The table below shows how to use this
remote control with your TV.
Button What it does
Press to switch the TV on/off
(standby)
INPUT SELECT
Press to change the TV’s video
input
/–
Use to adjust the TV volume
C/–
Use to change TV channels
Maker Code
Alba 66
Bush 76
Finlux 84
Fisher 61, 65
Fujitsu 77
Funai 67
Goldstar 79
Grandiente 87
Grundig 51, 82
Hitachi 56, 60, 83, 86
ITT 70
Mitsubishi 59
Nokia 53, 81
Panasonic 58, 72
Philips 57, 85
Pioneer 50, 80
RCA 68
Salora 71
Samsung 73, 75
Sanyo 74
Sei 78
Sharp 52
Sony 54
Tandy 69
Telefunken 64
Thomson 62
Toshiba 55
JVC 63
DVR940HX_UK_EN.book 153 ページ ２００６年７月１２日 水曜日 午後４時５分