Pioneer DVR-440HX-S, Operating Instructions And Owner'S Manual

Page: 159 / 172

Additional information 17
159
En
After briefly unplug-
ging or after a power
failure the front panel
display shows ‘--:--’
• A backup battery inside the recorder keeps the clock and other
settings from being reset when there is no power to the recorder. After
unplugging or a power failure, the battery keeps all settings for a
period of several minutes. Reset the clock and other recorder settings
to use the recorder again.
Front panel display
shows ‘LOCK’ when a
button is pressed
• The Child Lock is on; turn off in order to use the recorder (page 56).
Can’t use One Touch
Copy (HDD to DVD)
• Make sure that there is a recordable DVD-R/-RW loaded with some
free space for recording and fewer than 99 titles already on the disc.
Also make sure that for a Video mode disc or a DVD+R, the disc isn’t
finalized.
• Make sure there is a recordable DVD+R/+RW loaded with some
free space for recording and fewer than 49 titles already on the disc.
• If you delete a title from a DVD+R/+RW disc, the number of
remaining recordable titles may not decrease.
• Further recording is not possible on a finalized DVD+R. Check that
there isn’t a disc menu on the disc you’re trying to use.
• If the title currently playing contains material that is copy-once
protected, One Touch Copy will not work.
• One Touch Copy can’t be used for titles over 8 hours long when
copying to DVD+R/+RW (though you can use a DVD+R DL).
• One Touch Copy can’t be used for
MN1
to
MN6
,
SEP
,
SLP
or
EP
titles
when copying to DVD+R/+RW.
• One Touch Copy doesn’t work if the recorder is already recording to
DVD.
Can’t use One Touch
Copy (DVD to HDD)
• Make sure that there is space available on the HDD and that there
are fewer than 999 titles on the HDD.
• One Touch Copy doesn’t work if the recorder is already recording to
the HDD.
•
DVR-940HX-S: One Touch Copy cannot be used to copy from DVD to
the external HDD (HDD2).
The picture freezes and
the front panel and
remote control buttons
stop working • Press STOP then try restarting playback.
• Press the front panel STANDBY/ON button to switch the power
off, then switch back on and restart playback. If the power fails to
switch off, press and hold
STANDBY/ON for 5 seconds until the
power switches off.
A device connected via
USB does to function.
• Check that it is a device that may be connected to this unit (digital
camera, USB memory, memory card reader or printer).
• Use a USB cable less than 5 m in length.
• Check that the USB cable is inserted fully.
• Check that the USB device is powered on.
• Only the first digital camera, USB memory or memory card reader
connected is readable by this unit. Unplug multiple devices and
connect the device you want to use first.
Problem Remedy
DVR940HX_UK_EN.book 159 ページ ２００６年７月１２日 水曜日 午後４時５分