background image

 

Playback

05

 

29

 

En

 

English

 

• When scanning DVDs with Dolby Digital or Linear 

PCM sound on forward 

 

Scan1

 

, Linear PCM is output 

from the coaxial digital output. No sound is output 
when using other scan speeds.

• Depending on the disc, normal playback may 

automatically resume when a new chapter is reached 
on a DVD disc.

 

Playing in slow motion

 

 

You can play video at various slow motion speeds. DVDs 
can be played in slow motion in either direction, while 
Video CDs can only be played forwards in slow motion.

 

1

During playback, press 

 

 

 PAUSE.

2

Press and hold 

 

 

 or 

 

 

 until slow motion 

reverse or forward playback starts.

3

Press the same button repeatedly to change the 

slow motion speed.

4

To resume normal playback, press 

 

 

.

 

 Note

 

• Reverse slow-motion playback may not be as smooth 

as forward and may be better with some discs than 
others.

• Depending on the disc, normal playback may 

automatically resume when a new chapter is reached 
on a DVD disc.

• No sound is output during slow-motion playback.

 

Frame advance/frame reverse

 

 

You can step forwards or backwards a frame at a time 
through a DVD. With Video CDs, you can only use frame 
advance.

 

1

During playback, press 

 

 

 PAUSE.

2

Press 

 

 

 or 

 

 

 to go backwards or forwards one 

frame.

3

To resume normal playback, press 

 

 

.

 

 Note

 

• Depending on the disc, normal playback may 

automatically resume when a new chapter is reached 
on a DVD disc.

DVD

Video CD

/

/

Slow 1/16

Slow 1/8

Slow 1/2

DVD

Video CD

/

/

DVR-230_KU.book Page 29 Thursday, January 27, 2005 2:42 PM

Summary of Contents for DVR-233-S





































































Reviews: