Getting started
04
21
En
English
6
Use the
/
(cursor up/down) buttons to select
‘Auto’ or ‘Manual’ clock setting, then press ENTER.
•
Auto clock setting
Some TV channels broadcast time signals together
with the program. This recorder can use these
signals to set the clock automatically.
Use the
/
(cursor left/right) buttons to set
‘Clock Set CH‘ to the channel preset number that
broadcasts a time signal, then move the cursor
down to ‘Start’ and press ENTER.
The recorder takes a short while to set the time. After
you see that the time has been set, select
Next
to
proceed.
If the time could not be set automatically, press
RETURN
to go back to the previous screen and select
Manual
.
•
Manual clock setting
If no stations in your area are broadcasting time
signals, you can set the clock manually.
Use the
/
(cursor left/right) buttons to set
your time zone.
Press
(cursor down) then use the
/
(cursor
left/right) buttons to set D.S.T. to On or Off, then
press ENTER.
Select
On
if you are currently using daylight saving
time.
Set the current date and time.
• Use the
/
(cursor up/down) buttons to change
the value in the highlighted field.
• Use the
/
(cursor left/right) buttons to move
from one field to another.
• Press
ENTER
to finish setting the time.
7
That’s it! Press ENTER to finish setting up.
Other settings you can make
After setting up using the Setup Navigator, you should be
ready to start enjoying your DVD recorder. It’s possible,
however, that you may want to make a couple of
additional settings, depending on how the recorder is set
up for TV broadcasts.
• Manual channel setting – This setting lets you skip
channels where there is no station, as well as
manually tune to stations. See
Manual CH Setup
on
page 47.
• VCR Plus+ channel setting – This setting lets you
assign guide channels to ensure that the VCR Plus+
programming system works correctly. See
Guide CH
Setup
on page 47.
Manual
Clock
Date
Time
Clock Set CH
Auto
Auto
Manual
Date
Time
Clock Set CH
- - / - - / - - - -
- - : - - AM
Start
0 0 2
Auto
Auto
Manual
Date
Time
Clock Set CH
Next
Start
0 0 2
Auto
01 / 01 / 2005 SAT
12 : 00 AM
USA
Alaska
Manual
Date
Time
Time Zone
D.S.T.
01 / 01 / 2005 SAT
12 : 00 AM
Off
Auto
Manual
USA
/
:
AM
Alaska
Manual
Date
Time
Time Zone
D.S.T.
01
01
00
12
/
SAT
2005
Off
Auto
Manual
Setup Navigator
Setup is complete!
Enjoy using your DVD recorder!
Finish Setup
DVR-230_KU.book Page 21 Thursday, January 27, 2005 2:42 PM
