Pioneer DVR-233-S Operating Instructions Manual Download Page 18

Page: 18 / 68

Controls and displays

11 2 3

(page 48)

Shows the remote control mode (if nothing is displayed,
the remote control mode is 1).

12 PM

Lights to indicate PM (after midday) for the clock display.

Remote control

STANDBY/ON

Press to switch the recorder on/into standby.

DISPLAY

Displays/changes the on-screen information displays.

DVD playback functions

AUDIO

(page 23, 31, 32)

Changes the audio language or channel. (When the
recorder is stopped, press to change the tuner
audio.)

SUBTITLE

(page 31)

Displays/changes the subtitles included in
multilingual DVD-Video discs.

ANGLE

(page 32)

Switches camera angles on discs with multi-angle
scenes.

VCR Plus+

Press, then use the number buttons to enter a

PlusCode

programming number for a timer recording.

Number buttons, CLEAR

Use the number buttons for track/chapter/title selection;
channel selection, and so on.

Use

CLEAR

to clear an entry and start again.

DISC NAVIGATOR, TOP MENU

Press to display the Disc Navigator, or the ‘top menu’
when a DVD-Video disc is loaded.

MENU

(page 24)

Press to display the menu of a DVD-Video disc.

///

(cursor buttons), CH +/–, ENTER

Used to navigate all on-screen displays. Press

ENTER

select the currently highlighted option. The

(cursor

right) button is also used to change the recording input.

Use the

CH +/–

buttons to change the channel of the

built-in TV tuner.

HOME MENU

Press to display the Home Menu, from which you can
navigate all the functions of the recorder.

10 RETURN

Press to go back one level in the on-screen menu or
display.

11 Playback and recording controls

(page 23)

(page 28)

Press to start reverse or forward scanning. Press
again to change the speed.

Press to start playback.

Press to pause playback or recording.

Press to stop playback or recording.

Press to skip to the previous or next title/chapter/
track; or to display the previous or next menu page.

(page 29)

While paused, press to show the previous or next
video frame; press and hold to start slow-motion
playback.

REC

(page 22)

Press to start recording. Press repeatedly to set the
recording time in blocks of 30 mins.

REC MODE

Press repeatedly to change the recording mode
(picture quality).

DVD RECORDER

REC

CM SKIP

REC MODE TIMER REC

RETURN

DISC NAVIGATOR

TOP

MENU

VCR

Plus+

CLEAR

AUDIO

SUBTITLE

ANGLE

STANDBY/ON

DISPLAY

ENTER

CH+

CH–

HOME

MENU

INPUT

DVR-230_KU.book Page 18 Thursday, January 27, 2005 2:42 PM

Summary of Contents for DVR-233-S





































































Search results

Summary of Contents for DVR-233-S

Reviews:

Related manuals for DVR-233-S

Brands by name

Popular brands

Pioneer DVR-233-S, Operating Instructions Manual

Search results

Summary of Contents for DVR-233-S

Reviews:

Related manuals for DVR-233-S

Brands by name

Popular brands