Pioneer DVR-233-S Operating Instructions Manual Download Page 14

Page: 14 / 68

Connecting up

Connecting to a cable box or satellite receiver (2)

If many or all the channels you receive by cable or satellite are scrambled, we recommend using this setup.

Using the setup on this page you can:

• Record any channel by selecting it on the cable box/satellite tuner.

Important

• Do not connect this recorder ‘through’ your VCR, satellite receiver or cable box. Always connect each component

directly to your TV or AV amp/receiver.

Connect the RF antenna cables as shown.

This enables you to watch and record TV channels.

Connect the AUDIO and VIDEO OUTPUT jacks on

this recorder to a set of audio/video inputs on your
TV using a set of A/V cables (as supplied).

This enables you to watch discs.

Connect the audio/video output of your cable

box/satellite tuner to the INPUT 1 jacks on this
recorder using a set of A/V cables.

This enables you to record scrambled TV channels.

Note

• The setup on this page does not allow you to watch

one channel and record another.

• The diagram shows standard video connections, but

you can alternatively use the S-video or component
video connections if they’re available.

AUDIO

VIDEO

DIGITAL

OUT

OUTPUT INPUT 1

VHF UHF

S-VIDEO

VIDEO

OUT

AUDIO

AC IN

COMPONENT VIDEO OUT

Cable box/
Satellite receiver

Antenna/cable TV
wall outlet

VHF/UHF

OUT

VHF/UHF

A/V

IN 1

A/V

OUT

DVR-230_KU.book Page 14 Thursday, January 27, 2005 2:42 PM

Summary of Contents for DVR-233-S





































































Search results

Summary of Contents for DVR-233-S

Reviews:

Related manuals for DVR-233-S

Brands by name

Popular brands

Pioneer DVR-233-S, Operating Instructions Manual

Search results

Summary of Contents for DVR-233-S

Reviews:

Related manuals for DVR-233-S

Brands by name

Popular brands