Scanning CDs and tracks
While you are using
DSC
, the beginning of
each track on the selected disc plays for about
10 seconds. When you are using
MCD
, the be-
ginning of the first track of each disc is played
for about 10 seconds.
1 Select the repeat range.
Refer to
Repeating play
on the previous page.
2 Press F to select SCAN.
Press
F
until
SCAN
appears in the display.
3 Press
r
to turn scan play on.
SCAN :ON
appears in the display. The first 10
seconds of each track of the current disc (or
the first track of each disc) is played.
4 When you find the desired track (or
disc) press
q
to turn scan play off.
SCAN :OFF
appears in the display. The track
(or disc) will continue to play.
#
If the display has automatically returned to
the playback display, select
SCAN
again by press-
ing
F
.
Notes
!
After track or disc scanning is finished, nor-
mal playback of the tracks will begin again.
!
If you turn scan play on during
DSC
and then
return to the playback display,
DSCN
appears
in the display.
Pausing CD playback
Pause lets you temporarily stop disc playback.
1 Press F to select PAUSE.
Press
F
until
PAUSE
appears in the display.
2 Press
r
to turn pause on.
PAUSE:ON
appears in the display. Play of the
current track pauses.
3 Press
q
to turn pause off.
PAUSE:OFF
appears in the display. Play will re-
sume at the same point that you turned pause
on.
Note
Press
f
on the remote control repeatedly dur-
ing playback to turn pause on or off.
Using ITS playlists
ITS (instant track selection) lets you make a
playlist of favorite tracks from those in the
multi-CD player magazine. After you have
added your favorite tracks to the playlist you
can turn on ITS play and play just those selec-
tions.
Creating a playlist with ITS
programming
You can use ITS to enter and playback up to 99
tracks per disc, up to 100 discs (with the disc
title). (With multi-CD players sold before the
CDX-P1250 and CDX-P650, up to 24 tracks can
be stored in the playlist.)
1 Play a CD that you want to program.
Press
r
or
q
to select a CD.
2 Press F and hold until TITLE IN appears
in the display, then press F to select ITS.
After
TITLE IN
is displayed, press
F
repeatedly,
the following functions appear in the display:
TITLE IN
(disc title input)
ITS
(ITS program-
ming)
Multi-CD Player
En
46
Section
10
