Pioneer DVH-P5050MP Operation Manual Download

Page: 72 / 92

Note

If seek tuning is performed in 50 kHz steps, sta-
tions may be tuned in imprecisely. Tune in the sta-
tions with manual tuning or use seek tuning
again.

Setting the AM tuning step

The AM tuning step can be switched between

9 kHz, the preset step, and 10 kHz. When

using the tuner in North, Central or South

America, reset the tuning step from 9 kHz (531

1,602 kHz allowable) to 10 kHz (530

1,640

kHz allowable).

1 Press F to select AM.

Press

repeatedly until

appears in the dis-

play.

2 Press

to select the AM tun-

ing step.

Pressing

will switch the AM tuning

step between 9 kHz and 10 kHz. The selected

AM tuning step will appear in the display.

Switching the warning tone

If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound. You can

turn off the warning tone.

1 Press F to select WARN.

Press

repeatedly until

WARN

appears in the

display.

2 Press

to turn warning tone on.

WARN :ON

appears in the display.

To turn warning tone off, press

Switching the auxiliary setting

It is possible to use auxiliary equipment with

this unit. Activate the auxiliary setting when

using auxiliary equipment connected to this

unit.

1 Press F to select AUX.

Press

repeatedly until

AUX

appears in the

display.

2 Press

to turn auxiliary setting on.

AUX :ON

appears in the display.

To turn auxiliary setting off, press

Switching the dimmer setting

To prevent the display from being too bright at

night, the display is automatically dimmed

when the car

s headlights are turned on. You

can switch dimmer on or off.

1 Press F to select DIMMR.

Press

repeatedly until

DIMMR

appears in

the display.

2 Press

to turn dimmer on.

DIMMR :ON

appears in the display.

To turn dimmer off, press

Setting the rear output and

subwoofer controller

This unit

s rear output (rear speaker leads out-

put) can be used for full-range speaker

(

R-SP :FUL

) or subwoofer (

R-SP :S/W

) connec-

tion. If you switch the rear output setting to

the

R-SP :S/W

, you can connect a rear speaker

lead directly to a subwoofer without using an

auxiliary amp.

Initially, the unit is set for rear full-range speak-

er connection (

R-SP :FUL

). When rear output

Initial Settings

Section

Summary of Contents for DVH-P5050MP





























































































Search results

Summary of Contents for DVH-P5050MP

Reviews:

Related manuals for DVH-P5050MP

Brands by name

Popular brands

Pioneer DVH-P5050MP, Operation Manual

Search results

Summary of Contents for DVH-P5050MP

Reviews:

Related manuals for DVH-P5050MP

Brands by name

Popular brands