Setting scan play
Scan play lets you hear the first 10 seconds of
each track on the CD.
1 Move the joystick left or right to select
the scan option.
The scan option is highlighted.
2 Move the joystick up or down to switch
to the desired setting.
This switches you to the selected setting.
!
ON
The first 10 seconds of each track is
played
!
OFF
Tracks will continue to play
3 When you find the desired track, move
the joystick up or down to cancel the scan
play.
Note
After scanning of a CD is finished, normal play-
back of the tracks will begin again.
Pausing CD playback
Pause lets you temporarily stop disc playback.
%
Press
f
during playback.
The icon
e
is displayed for four seconds and
playback is paused.
#
To resume playback at the same point that you
turned pause on, press
f
again.
Using CD TEXT functions
Some discs have certain information encoded
on the disc during manufacture. These discs
may contain such information as the CD title,
track title, artist
s name and playback time
and are called CD TEXT discs. Only these spe-
cially encoded CD TEXT discs support the
functions listed below.
Displaying titles on CD TEXT discs
%
Press DISP to switch the information
display.
Press
DISP
repeatedly to switch between the
following display modes:
Information display
Disc Title
(disc title
display)
Disc Artist
(disc artist name display)
Track Title
(track title display)
Track Artist
(track artist name display)
!
If specific information has not been re-
corded on a CD TEXT disc,
No XXXX
will be
displayed (e.g.,
No Track Title
).
!
Some characters may not be displayed
properly.
Playing CDs
En
34
Section
08
