!
External unit refers to a Pioneer product (such
as one available in the future) that, although
incompatible as a source, enables control of
basic functions by this unit. Two external units
can be controlled by this unit. When two exter-
nal units are connected, the allocation of
them to external unit 1 or external unit 2 is
automatically set by this unit.
!
When this unit
s blue/white lead is connected
to the car
s auto-antenna relay control term-
inal, the car
s antenna extends when this
unit
s source is turned on. To retract the an-
tenna, turn the source off. (When you con-
nected a Pioneer multi-channel processor
(DEQ-P7050) to this unit, auto-antenna cannot
be controled.)
Loading a disc
1 Press OPEN to open the front panel.
Disc loading slot appears.
#
After a disc has been inserted, press
SOURCE
to select the DVD player.
2 Insert a disc into the disc loading slot.
When you set
A-PLY: ON
, playback will auto-
matically start. If you set
A-PLY: OFF
, press
SOURCE
to select
DVD
(refer to the previous
page).
Disc loading slot
EJECT
button
#
To eject a disc, press
EJECT
.
#
To avoid a malfunction, make sure that no
metal object comes into contact with the term-
inals when the front panel is open.
3 Close the front panel.
Notes
!
The DVD player plays one, standard, 12-cm or
8-cm (single) disc at a time. Do not use an
adapter when playing 8-cm discs.
!
Do not insert anything other than a disc into
the disc loading slot. Discs which can be
played back are listed on
Playable discs
on
page 6.
!
If you cannot insert a disc completely or if
after you insert a disc the disc does not play,
check that the label side of the disc is up.
Press
EJECT
to eject the disc, and check the
disc for damage before inserting the disc
again.
!
If the DVD player does not operate properly,
an error message such as
ERROR-02
may be
displayed. Refer to
Error messages
on page
79.
Adjusting the volume
%
Use VOLUME to adjust the sound level.
With the head unit, rotate
VOLUME
to in-
crease or decrease the volume.
With the remote control, press
VOLUME
to in-
crease or decrease the volume.
Turning the unit off
%
Press SOURCE and hold until the unit
turns off.
Basic Operations
En
14
Section
04
