Pioneer CNDV-40R, Operating Manual

Page: 88 / 120

86
Chapter 5
Combining and Using Pioneer AV Equipment
TROL:INTERNAL ” or the auxiliary “ S.W. CON-
TROL:EXTERNAL ”.
❒
Even if you change this setting, there is no
output unless you switch the non fading out-
put (refer to page 83) or subwoofer output
(refer to page 83) in the audio menu on.
❒
If you change the subwoofer controller, sub-
woofer output and non fading output in the
audio menu return to the factory settings.
❒
Both rear speaker leads output and RCA rear
output are switched simultaneously in this
setting mode.
1
Press
5
or
∞
to select “REAR SPEAKER”
from the INITIAL SETTINGS MENU, and
press the A.MENU (AUDIO) button.
2
Change the rear output setting with
5
or
∞
.
Pressing
5
or
∞
will switch between “ REAR
SPEAKER:FULL ” (full-range speaker) and
“ REAR SPEAKER:SUBWOOFER ” (sub-
woofer).
❒
When no subwoofer is connected to the
rear output, select “
REAR
SPEAKER:FULL ”.
❒
When a subwoofer is connected to the rear
output, set for subwoofer “
REAR
SPEAKER:SUBWOOFER ”.
❒
When the rear output setting is “ REAR
SPEAKER:SUBWOOFER ”, you cannot
change the subwoofer controller.
3
Change the subwoofer controller with
2 2 2 2
or
3 3 3 3
.
Pressing
2 2 2 2
or
3 3 3 3
will switch between “ S.W.
CONTROL:INTERNAL ” and “ S.W. CON-
TROL:EXTERNAL ”.
Switching the Muting/Attenua-
tion
When the navigation outputs the guidance voice,
or when a mute signal has been received from
the yellow/black lead connected to the Pioneer
AV Head Unit, the audio volume is muted or
attenuated.
This function is activated in the following condi-
tion:
— When “ MUTE ” or “ ATT ” is selected in the
mute setting.
— When “ On ” is selected in “ Mute Setting ”.
➲
Mute setting
➞
Page 51
❒
The sound is turned off, “ MUTE ” is displayed
and no audio adjustments are possible.
❒
The sound is attenuated, “ ATT ” is displayed
and no audio adjustments, except volume
control, are possible.
❒
Operation returns to normal when the phone
connection is ended or when the navigation
guidance and voice operation are ended.
❒
The guidance voice of navigation isn’t muted
or attenuated when a call is made or received.
1
Press
5
or
∞
to select “TEL/GUIDE
MUTE/ATT” from the INITIAL SET-
TINGS MENU, and press the A.MENU
(AUDIO) button.
2
Switch the muting/attenuation mode with
2 2
2 2
or
3 3
3 3
.
MUTE : Volume is turned to 0.
ATT : Volume is set to 1/4.
NORMAL : Volume remains the same.