Inactive touch panel key: The function is not
available (e.g., operation is prohibited while
driving).
Basic Navigation
CAUTION
For safety reasons, you cannot use some of these
basic navigation functions while your vehicle is in
motion. To enable these functions, you must stop
in a safe place and apply the handbrake (refer to
To ensure safe driving
on page 19).
Basic flow of operation
1
Park your vehicle in a safe place, and
apply the handbrake.
2
Press MENU button to display the navi-
gation menu.
3
Select the method of searching for your
destination.
4
Enter the information about your desti-
nation to calculate route.
5
Confirm the location on the map.
6
Check and decide the route.
7
Your navigation system sets the route
to your destination, and the map of your
surroundings appears.
8
After releasing the handbrake, drive in
accordance with the navigation informa-
tion, subject to the important safety in-
structions noted on
Important Safety
Information
on page 18 and
Additional
Safety Information
on page 19.
Calculating your destination by
using Address Search
The most frequently used function is [
Address
Search
], in which the address is specified and
the destination is searched. This section de-
scribes how to use [
Address Search
] and the
basics of using the navigation system.
1
Press MENU button to display the navi-
gation menu.
2
Touch [Destination] in the navigation
menu.
3
Touch [Address Search].
Select the method for searching the destina-
tion.
4
Touch [Country code key] to select the
country.
If the destination is in another country, this
changes the country setting.
p
Once the country has been selected, you
only have to change countries when your
destination is outside of the country you se-
lected.
Basic Operation
Engb
24
Chapter
03
