Black plate (15,1)
4
Press the
h
button.
The LCD panel closes.
Ejecting an SD memory card
1
Press the
h
button.
The following screen appears.
2
Touch the following key.
Opens the LCD panel.
3
Press the middle of the SD memory
card gently until it clicks.
4
Pull the SD memory card out straight.
5
Press the
h
button.
The LCD panel closes.
Connecting and disconnecting
an iPod
Connecting your iPod
=
For details of the connections, refer to the
Installation Manual.
Disconnecting your iPod
%
Pull out the cables after confirming
that no data is being accessed.
Plugging and unplugging a USB
storage device
p
This product may not achieve optimum per-
formance with some USB storage devices.
p
Connection via a USB hub is not possible.
p
A USB cable is required for connection.
Plugging in a USB storage device
1
Pull out the plug from the USB port of
the USB cable.
2
Plug a USB storage device into the USB
cable.
2
1
1
USB cable
2
USB storage device
Unplugging a USB storage device
%
Pull out the USB storage device after
checking that no data is being accessed.
Startup and termination
1
Start the engine to boot up the system.
After a short pause, the splash screen comes
on for a few seconds.
2
Turn off the vehicle engine to termi-
nate the system.
This product is also turned off.
<CRB4349-A>15
Engb
15
Chapter
02
Basic
operation
Basic operation