28
Setup 3: Installing the Program
The program is installed to the main unit of the Navigation System using the disc provided.
When installing the program, you carry out the following operations. When all the setup proce-
dures are completed, the map of your surroundings appears, and you can use the Navigation
System.
1
Park your car in a safe place.
Leave the engine on, and make sure that the parking brake is on.
2
Insert the disc to the main unit of the Navigation System.
3
Select “Yes” and click the OK button.
When you start this unit for the first time, the message confirming if you select another
language.
English is the default language of the Navigation System. If desired, you can select
another language.
➲
To keep English, move the joystick down to highlight “No”, and click the OK button.
After this, proceed to Step 6.
➲
When you want to select another language, highlight “Yes”, click the OK button, and
proceed to the next step.
4
Select the language from the list.
The list of the languages you can use appears. Move the joystick up or down to highlight
the language you want.
5
Click the OK button.
Installation of the program, in the language you chose, begins. During the installation, the
following display appears to show the progress.
When the installation is complete, the opening display appears.
Caution
Once the installation of the program starts, do not stop the engine of your car
until the installation is completed.
1.
Insert the disc while the car is parked.
2.
Select the language used for the Navigation System.
3.
Setting the clock.
Summary of Contents for AVIC-9DVD
