Pioneer AVIC-9DVD Operation Manual Download Page 107

Page: 107 / 160

105

Chapter

Pla

ying D

VD/CD

Chapter

Playing DVD/CD

To Ensure Safe Driving

WARNING

• To avoid the risk of accident and the potential violation of applicable laws,

this product is not for use with a video screen that is visible to the driver.

• In some countries or states the viewing of images on a display inside a car

even by persons other than the driver may be illegal. Where such regulations
apply, they must be obeyed.

This product detects whether your car’s parking brake is engaged or not, and prevents you
from watching a DVD on the display connected to Video Output while driving.
The following message will be displayed on the screen while the car is moving:

YOU CANNOT USE THIS FUNCTION WHILE DRIVING

When you park your car in a safe place and apply the parking brake, the picture appears on
the screen.

Summary of Contents for AVIC-9DVD
































































































































































Search results

Summary of Contents for AVIC-9DVD

Reviews:

Brands by name

Popular brands

Pioneer AVIC-9DVD, Operation Manual

Search results

Summary of Contents for AVIC-9DVD

Reviews:

Brands by name

Popular brands