Pioneer AVIC-9DVD, Operation Manual

Page: 121 / 160

119
Chapter
8
Pla
ying D
VD/CD
Switching camera angles during playback
Depending on the DVD, some may have images filmed from several angles in one scene.
While playing DVD, you can change the angle of the image.
1 Press the ANGLE button while playing the section that is filmed from several angles.
Angle selection mark and the current angle number are indicated.
2 While the angle selection mark is shown, press the ANGLE button.
As you press the ANGLE button, the angle is switched over.
➲
If a DVD does not have several angles filmed in one scene, you cannot switch angles.
➲
You cannot change the angle while playing slowly.
➲
If you do not press any buttons or enter any keys for about eight seconds, angle selection
mark disappears. When changing angles, press the ANGLE button again.
➲
You can also change the angle by moving the joystick up or down, or by pressing the
numeric keypad while the angle selection mark is shown.
➲
You can switch the display of angle selection mark ON or OFF. ( see “Setting the display of
the angle selection symbol” on page 128 )
Section where you can change the angle
At a section where the angle can be changed, the angle selection mark appears on the
bottom-right of the screen.
1
Angle selection mark