background image

 

ORDER NO.

  

PIONEER CORPORATION   

4-1, Meguro 1-chome, Meguro-ku, Tokyo 153-8654, Japan

PIONEER ELECTRONICS (USA) INC.  P.O. Box 1760, Long Beach, CA 90801-1760, U.S.A.
PIONEER EUROPE NV  Haven 1087, Keetberglaan 1, 9120 Melsele, Belgium
PIONEER ELECTRONICS ASIACENTRE PTE. LTD.  253 Alexandra Road, #04-01, Singapore 159936

    PIONEER CORPORATION 2005

 

AVIC-D1/UC

 

CRT3466

 

DOUBLE-DIN DVD NAVIGATION SYSTEM

 

AVIC-D1

 

/UC

 

This service manual should be used together with the following manual(s):

 

Model No.

Order No.

Mech.Module

Remarks

 

CX-3016

CRT3056

MS3

DVD Mech. Module:Circuit Description, Mech. Description, Disassembly

CX-3158

CRT3394

S10.1AAC

CD Mech. Module:Circuit Description, Mech. Description, Disassembly

For details, refer to "Important Check Points for Good Servicing". 

 

K-ZZW. APR.  2005 Printed in Japan

This product has the unit part number as below.

Unit Part No.
CPN1951

Description
Navigation Unit

*) The unit part numbers listed above are not for the service components.

Summary of Contents for AVIC-D1





















































































































































































































































































Reviews: