Pioneer AVH-P5750DVD Operation Manual Download Page 93

Page: 93 / 109

Troubleshooting

Common

Symptom

Cause

Action (See)

Power doesn

t turn on.

The unit doesn

t operate.

Leads and connectors are incor-

rectly connected.

Confirm once more that all connections are

correct.

The fuse is blown.

Rectify the reason for the fuse blowing, then

replace the fuse. Be very sure to install the

correct fuse with the same rating.

Noise and other factors are causing

the built-in microprocessor to oper-

ate incorrectly.

Press

RESET

. (Page 10)

Playback is not possible.

The disc is dirty.

Clean disc. (Page 97)

The loaded disc is a type this unit

cannot play.

Check what type the disc is.

Non compatible video system disc

is loaded.

Change to a disc compatible to your video

system.

No sounds are heard.

The volume level will not rise.

Cables are not connected correctly. Connect the cables correctly.
The unit is performing still, slow mo-

tion or frame-by-frame playback.

There is no sound during still, slow motion or

frame-by-frame playback.

There is no picture.

The parking brake cord is not con-

nected.

Connect a parking brake cord, and apply the

parking brake.

The parking brake is not applied.

Connect a parking brake cord, and apply the

parking brake.

The icon

is displayed, and op-

eration is not possible.

The operation is prohibited for the

disc.

This operation is not possible.

The operation is not compatible

with the disc

s organization.

This operation is not possible.

The picture stops (pauses) and

the unit cannot be operated.

Reading of data has become impos-

sible during playback.

After pressing

once, start playback once

more.

There is no sound.

Volume level is low.

The volume level is low.

Adjust the volume level.

The attenuator is on.

Turn the attenuator off.

There is audio and video skip-

ping.

The unit is not firmly secured.

Secure the unit firmly.

The picture is stretched, the as-

pect is incorrect.

The aspect setting is incorrect for

the display.

Select the appropriate setting for your display.

(Page 82)

When the ignition switch is

turned ON (or turned to ACC),

the motor sounds.

The unit is confirming whether a

disc is loaded or not.

This is a normal operation.

Nothing is displayed.

The touch panel keys cannot be

used.

The rear view camera is not con-

nected.

B-CAM

is at incorrect setting.

Connect a rear view camera.

Press

V.ADJ

to return to the source display

and then select the correct setting for

B-

CAM

. (Page 88)

Additional Information

Appendix

Additional

Information

Summary of Contents for AVH-P5750DVD














































































































Search results

Summary of Contents for AVH-P5750DVD

Reviews:

Related manuals for AVH-P5750DVD

Brands by name

Popular brands

Pioneer AVH-P5750DVD, Operation Manual

Search results

Summary of Contents for AVH-P5750DVD

Reviews:

Related manuals for AVH-P5750DVD

Brands by name

Popular brands