Mixing AVG-VDP1 beep and
audio sound
When connecting the AVG-VDP1 to this unit, a
beep sound is occasionally outputted from the
AVG-VDP1. To ensure the quality audio sound
from this unit, set this function to
GUIDE
to
properly mix the beep sound and the audio
sound.
!
You can operate this function only when a
Pioneer Vehicle Dynamics Processor (AVG-
VDP1) is connected to this unit.
!
When the multi-channel processor (e.g.,
DEQ-P7650/DEQ-P6600) is connected to
this unit, you cannot use this function.
!
We recommend that you select
GUIDE
to
ensure quality sound.
1 Touch NEXT on the initial menu.
2 Touch V.D.P.MIX to switch the mixing of
AVG-VDP1 beep.
Touching
V.D.P.MIX
switches the mixing set-
tings between
ALL
(mixing all the time) and
GUIDE
(mixing when a beep sound is out-
putted).
Resetting the audio functions
You can reset all audio functions except vo-
lume.
!
Only when the multi-channel processor
(e.g., DEQ-P7650/DEQ-P6600) is connected
to this unit, you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
#
To cancel resetting the audio functions, touch
CANCEL
.
Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
!
This function is initially set to
AUTO
so that
this unit automatically adjusts the TV signal
setting.
1 Touch NEXT on the initial menu.
2 Touch TV SIG to select an appropriate
TV signal.
Touching
TV SIG
switches TV signal settings
in the following order:
AUTO
PAL
NTSC
PAL-M
SECAM
Note
About your country TV signal, consult with your
nearest Pioneer dealer.
Initial Settings
En
87
Section
17
Initial
Settings
