4 Touch
c
or
d
to switch the subwoofer
output or non fading output.
Touch
c
to select subwoofer output and
SUB.W
appears in the display. Touch
d
to se-
lect non fading output and
FULL
appears in
the display.
Notes
!
Even if you change this setting, there is no
output unless you turn the nonfading output
(refer to
Using nonfading output
on page 65)
or subwoofer output (refer to
Using subwoofer
output
on page 65) in the audio menu on.
!
If you change the subwoofer controller, sub-
woofer output and nonfading output in the
audio menu return to the factory settings.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
LOW
. Normally, leave the set-
ting at
HIGH
to ensure quality sound.
!
Only when the multi-channel processor
(e.g., DEQ-P7650/DEQ-P6600) is connected
to this unit, you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch D. ATT to switch the digital at-
tenuator setting.
Touching
D. ATT
switches the digital attenua-
tor settings in the following order:
HIGH
LOW
Switching the sound
muting/attenuation
Sound from this system is muted or attenu-
ated automatically when the signal from the
equipment with mute function is received.
!
The sound is turned off,
MUTE
is displayed
and no audio adjustments are possible.
!
The sound is attenuated,
ATT
is displayed
and no audio adjustments, except volume
control, are possible.
!
Sound from this system returns to normal
when the muting or attenuation is can-
celed.
1 Touch NEXT on the initial menu.
2 Touch TEL/GUIDE to select any of the
muting, attenuation, mixing or off.
Touch
TEL/GUIDE
until the desired setting ap-
pears in the display.
!
MUTE
Muting
!
ATT 20
Attenuation (
ATT 20
has a stron-
ger effect than
ATT 10
)
!
ATT 10
Attenuation
!
OFF
Turn the sound muting/attenuation
off
Notes
!
The sound is turned off or attenuated,
MUTE
or
ATT
are displayed and no audio adjustment
is possible.
!
Operation returns to normal when the phone
connection or the voice guidance is ended.
Initial Settings
En
86
Section
17