!
To select 10, touch
1
and
0
in that order.
!
To select 23, touch
2
and
3
in that order.
For time (time search)
!
To select 21 minutes 43 seconds, touch
2
,
1
,
4
and
3
in that order.
!
To select 1 hour 11 minutes, convert the
time into 71 minutes 00 seconds and touch
7
,
1
,
0
and
0
in that order.
#
To cancel the inputted numbers, touch
C
.
5 While the inputted number is dis-
played, touch ENTER.
This starts playback from the selected scene.
Notes
!
With discs featuring a menu, you can also
touch
MENU
or
TOP.M
and then make selec-
tions from the displayed menu.
!
With some discs, the icon
may be dis-
played, indicating that titles, chapters and
time cannot be specified.
Specifying title
You can use the direct search function to
search for a desired scene by specifying a title.
1 Touch
d
until 10key appears in the dis-
play.
2 Touch 10key.
3 Touch 0-9 corresponding to a desired
title number when the disc is stopped.
Title number is displayed for eight seconds
and playback starts from the selected title.
!
To select 3, touch
3
.
!
To select 10, touch
1
and
0
in that order.
!
To select 23, touch
2
and
3
in that order.
Note
To perform this function with the remote control,
switch the remote control operation mode to
DVD
. (Refer to
Using the remote control operation
mode switch
on page 16.)
Changing audio language
during playback (Multi-audio)
DVDs can provide audio playback with differ-
ent languages and different systems (Dolby Di-
gital, DTS etc.). With DVDs featuring multi-
audio recordings, you can switch between lan-
guages/audio systems during playback.
1 Touch
d
until AUDIO appears in the
display.
2 Touch AUDIO during playback.
Each time you touch
AUDIO
it switches be-
tween audio systems.
Notes
!
You can also switch between languages/audio
systems using
AUDIO
on the remote control.
!
The number in the
2
mark on a DVD
s pack-
age indicates the number of recorded lan-
guages/audio systems.
!
With some DVDs, switching between lan-
guages/audio systems may only be possible
using a menu display.
!
You can also switch between languages/audio
systems using
DVD SETUP
. For details, refer
to
Setting the audio language
on page 81.
!
Only digital output of DTS audio is possible. If
this unit
s optical digital outputs are not con-
nected, DTS audio will not be output, so select
an audio setting other than DTS.
!
Display indications such as
Dolby D
and
5.1ch
indicate the audio system recorded on
the DVD. Depending on the setting, playback
may not be with the same audio system as
that indicated.
Playing DVD video discs
En
30
Section
06
