Listening to the radio
1
2
4
3
6
7
5
These are the basic steps necessary to operate
the radio. More advanced tuner operation is
explained starting on the next page.
1
Source icon
Shows which source has been selected.
2
Band indicator
Shows which band the radio is tuned to, AM
or FM.
3
Preset number indicator
Shows which preset has been selected.
4
Frequency indicator
Shows to which frequency the tuner is
tuned.
5
Preset list display
Shows the preset list.
6
LOCAL indicator
Shows when local seek tuning is on.
7
STEREO indicator
Shows that the frequency selected is being
broadcast in stereo.
1 Touch the source icon and then touch
TUNER to select the tuner.
2 Touch the screen to display the touch
panel keys.
3 Touch BAND to select a band.
Touch
BAND
repeatedly until the desired band
is displayed,
FM1
,
FM2
,
FM3
for FM or
AM
.
4 To select a preset channel, touch a pre-
set channel on the list.
The preset channel you selected is tuned in.
#
When the list of channels is not displayed,
touch
LIST
.
5 To perform manual tuning, briefly
touch
c
or
d
.
The frequencies move up or down step by
step.
#
You can also perform manual tuning by press-
ing
c
or
d
button or moving the joystick on the
remote control left or right.
6 To perform seek tuning, keep touching
c
or
d
for about one second and release.
The tuner will scan the frequencies until a
broadcast strong enough for good reception is
found.
#
You can cancel seek tuning by briefly touching
either
c
or
d
.
#
If you keep touching
c
or
d
you can skip sta-
tions. Seek tuning starts as soon as you release
the key.
#
You can also perform seek tuning by pressing
and holding
c
or
d
button or holding the joystick
on the remote control left or right.
Note
If you do not use the touch panel keys within 30
seconds, they will be hidden automatically.
Tuner
En
24
Section
05
