3 Touch
c
or
d
to select a desired level.
Each time you touch
c
or
d
selects level in
the following order:
LOW
(low)
MID
(mid)
HIGH
(high)
Using subwoofer output
This unit is equipped with a subwoofer output
which can be turned on or off.
!
When the subwoofer output is on, you can
adjust the cut-off frequency and the output
level of the subwoofer.
1 Touch SUB WOOFER on the audio func-
tion menu.
#
When the subwoofer controller setting is
FULL
, you cannot select
SUB WOOFER
.
2 Touch
c
to turn subwoofer output on.
#
To turn subwoofer output off, touch
d
.
3 Touch
b
and then touch
c
or
d
to se-
lect the phase of subwoofer output.
Touch
d
to select normal phase and
NORMAL
appears in the display. Touch
c
to
select reverse phase and
REVERSE
appears in
the display.
4 Touch
b
and then touch
c
or
d
to ad-
just the output level of the subwoofer.
Each time you touch
c
or
d
increases or de-
creases the level of the subwoofer.
+6
6
is
displayed as the level is increased or de-
creased.
5 Touch
b
and then touch
c
or
d
to se-
lect cut-off frequency.
Each time you touch
c
or
d
selects cut-off fre-
quencies in the following order:
50Hz
80Hz
125Hz
Only frequencies lower than those in the se-
lected range are outputted from the sub-
woofer.
Using nonfading output
When the nonfading output setting is on, the
audio signal does not pass through this unit
s
low pass filter (for the subwoofer), but is out-
putted through the RCA output.
1 Touch NON FADING on the audio func-
tion menu.
#
When the subwoofer controller setting is only
FULL
, you can select
NON FADING
. (Refer to
page 85.)
2 Touch
a
to turn non fading output on.
#
To turn non fading output off, touch
b
.
3 Touch
c
or
d
to adjust the output level
of the non fading.
Each time you touch
c
or
d
increases or de-
creases the level of the non fading.
+6
6
is
displayed as the level is increased or
decreased.
Using the high pass filter
When you do not want low sounds from the
subwoofer output frequency range to play
from the front or rear speakers, turn on the
HPF (high pass filter). Only frequencies higher
than those in the selected range are outputted
from the front or rear speakers.
1 Touch NEXT on the audio function
menu.
2 Touch HPF.
3 Touch
a
to turn high pass filter on.
#
To turn high pass filter off, touch
b
.
Audio Adjustments
En
65
Section
14
Audio
Adjustments
