Hunter-Pro Series Captain 8 - Installation Guide
42
information. Remote connection with the alarm system must be approved by the master user,
only on the first time, or every time a connection is required. The Master user must approve the
remote connection. See section 15.8, on page 80 for details.
3.1.3.
Programming via LCD keypads
PIMA's intruder alarm systems have two menus: User menu and Installer menu, each accessed by
a separate password:
The User menu is where the master user can program parameters such as time, date
and user codes see the user guide of each system for full information.
The Installer menu contains all the technical and the reporting parameters, which are
programmed by the installer.
Parameter sets
In parameter sets screens, each letter or digit stands for a parameter. In these sets, (+) signifies
that the parameter is enabled (-) signifies that the parameter is disabled
To move the cursor (
_
) press [NEXT]/[BACK]. To change a parameter from (+) to (-) and vice
versa, press [#].
Note that when cursor moves to the next character, a short description of the parameter is
displayed for 3 seconds. To re-display it, press [BACK/NEXT] again.
Diagram 44.
A parameter set screen (left) and description
3.1.4.
Factory default codes
The factory default codes are:
Master Code: 5555
Installer Code: 1234
The default codes must be changed as part of the installation process!
3.2.
Express programming menu
To make basic programming as easy and quick as possible, the Hunter-Pro Series and Captain 8
systems have a special menu, made of a sequence of screens with all the necessary parameters
for a common installation.
For details, see section 12, on page 70.
S R K 1 2 1 2 3 H T B L
+ - - - _ + + + + - - -
SSAL
_---
Activate Siren
_---
...
