54
HUNTER-PRO 896 Installation Guide
IMPORTANT!
The following menus are available only if the enhanced menu is enabled (see
section
5.1).
5.4.7 GSM-200
Transmitter
5.4.7.1 Parameters
3
ENTR
ENTR
NEXT
X6
Communication
ENTER/NEXT/END
GSM Transmitter
ENTER/NEXT/END
GSM Settings
ENTER/NEXT/END
ENTR
GRTY
----
Par.
Name
Mark “+” to indicate that…
G
GSM TX Installed
GSM-200 transmitter is installed
R
Use Radio ID Account Radio Account IDs will be used for GSM reports
T
Auto Test Report
Reports for auto-tests will be reported via GSM in
addition to PSTN
Y
GPRS Encryption
The information sent via GSM will be encrypted and
sent in GPRS protocol
IMPORTANT!
If a radio transmitter is not connected to the system, ‘T’ should be set to
zero in the “Comm. Format” screen (“T” stands for wireless communication
format). Otherwise, all events will be reported via radio as well!
5.4.7.2 GSM
Modes
GSM Settings
ENTER/NEXT/END
NEXT
GSM Modes
ENTER/NEXT/END
ENTR
GSM-200 Mode 1
Voice Channel
NEXT
GSM-200 Mode 1
Data Channel
NEXT
GSM-200 Mode 1
GPRS Channel
NEXT
GSM-200 Mode 1
SMS Channel
Set the GSM-200 transmitter operating modes. The transmitter has 2 modes: Mode 1
for MS1 and mode 2 for MS2 (double report).
Each mode can be set to one of four channels: Voice, Data, GPRS or SMS
3
.
When setting a mode to data channel, for example, the transmitter waits for data
format information and not other.
The Data channel can be used by COMAX for uploading and downloading. To do that,
the GSM-200 SIM must have a second phone number.
If both MSs are connected using GPRS, the second channel will be used to report
to MS2.
3
GSM-200 and SMS-100 cannot be installed in the same system.