background image

1

USER MANUAL

Pandora DXL 1090L 

– is a premium car service-security system, built for cars with 

on-board voltage of 12V. It is a complex engineering solution which includes car 

security system, telemetry, remote and automatic engine start and various service 

options, all controlled from your OEM key remote, smartphone or online service.

When building 

Pandora DXL 1090L 

we were using the most up-to-date 

electronics from world’s best manufacturers. The device is built using high-precision 

mounting and control machinery, thus we guarantee highest possible quality, 

reliability and stable technical characteristics for the whole operation period. 

Pandora DXL 1090L

 has a cryptographically strong authorization code with 

unique dialog algorithm and individual 128 bit encryption key on every device. We 

guarantee 100% protection form electronic hacking for the whole operation period.

The system is built for your convenience: it’s ergonomic, reliable, has the highest 

security and service characteristics. We are happy to provide any support we can – feel 

free to use our online support.

 

WARNING! It is strongly advised to have professional car mechanic 

installing the system. Any car electronics installer should be able to 

install Pandora DXL 1090L using installation scheme in this manual and 

AlarmStudio software. Most features are highly dependent on competent 

installation. Our systems are thoroughly tested for quality, so if a feature fails 

to produce expected result, most likely the problem is in improper installation.

Pandora would like to thank you for choosing our 

DXL 1090L service and security system 

Summary of Contents for DXL 1090L




































Reviews: