HUNTER-PRO 896 Installation Guide
39
4.2.5 Menu
Navigation
Backward/Forward keys. Press these keys to navigate between screens/
options/parameters.
Selection/Conformation keys.
Exit key. Pressing this key exits a current menu without saving/changing it.
Reset/Erase/Change status key (“-” to “+” and vice-versa).
4.3 Default
Codes
The system default codes are:
Master Code
5555
Technician Code
1234
4.4 User
Menu
There are 3 ways to enter the user menu, where parameters like time, dialer numbers
and codes are programmed:
1. Using Master code:
User Menu
Choose 1,2..
MASTER
CODE
9
2. Using enabled (see notes
below) User code:
User Menu
Choose 1,2..
USER
CODE
9
3. Using Technician code
(see notes below)
TECHNICIAN
CODE
0
9
User Menu
Choose 1,2..
Notes
:
1. Only enabled user code can access the user menu. Once enabled, entering it will
display the User menu. To enable, mark “+” under “M” (User Code>Menu) in
“General Parameters” menu (see section 5.6). As a result, actions such as arming
and disarming cannot be activated directly by the user code, but by entering the
user code first and then pushing the desired key.
2. User Code has no authorization to change Master Code.
3. When accessing User menu from within Installer menu, changing codes is disabled.