Pilz PSEN sc L 3 Series, Operating Manual

Page: 75 / 97

Operation
Operating Manual PSEN sc L 3/5 series
1005056-EN-01
| 75
10.3 Diagnostic information
10.3.1 Error
Message in the display Error/cause Description/measure
Icon Text
CLEANW1 The front panel of the safety laser
scanner must be cleaned. Clean front panel
INPUTCF1 Error in the configuration or the wir-
ing.
Check whether the wiring [ 45]
and the configuration [ 66] will
match.
INPUTCF2 Configuration error. In the configuration, check the con-
figured state transitions and switch-
ing operations.
INTF1 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.
INTF2 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.
INTF3 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.
INTF4 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.
INTF5 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.
INTF7 An error occurred during the system
test. Perform a reset of the safety laser
scanner [ 81] .
If the error persists, please contact
Pilz.