Installation and alignment
Operating Manual PSEN sc L 3/5 series
1005056-EN-01
| 54
Prerequisites
}
Mounting surface with 2 through-holes for screws M5x10 mm, distance 73 mm horizont-
ally towards each other for fixing the bracket of the safety laser scanner.
}
The mounting surface has to be accessible from both sides for installation.
Procedure:
1. Turn the safety laser scanner when the safety laser scanner is to be operated with the
top side down.
2. Use two M5 screws to fix the safety laser scanner to the mounting surface. Tighten the
screws to 3 Nm.
7.3
Installation of the protective bracket PSEN sc bracket H at
the safety laser scanner
For easy and flexible installation of the safety laser scanner, the safety laser scanner is
fixed to a protective bracket PSEN sc bracket H (see
). The protective bracket protects the safety laser scanner against
damage by falling objects.
With this protective bracket the safety laser scanner can be used in both brackets
PSEN sc bracket PR or PSEN sc bracket P (see
1. Turn the safety laser scanner when the safety laser scanner is to be operated with the
top side down.
2. Fix the PSEN sc bracket H at the rear of the safety laser scanner with two M5 screws
and tighten both screws with 3 Nm.
[1]
[2]
[3]
Legend
[1]
PSEN sc bracket H (protective bracket for
safety laser scanner)
[2]
M5 screws for fixing the PSEN sc bracket H
at the safety laser scanner
[3]
PSEN sc bracket H installed at the safety
laser scanner
