OPERATING MANUAL
PSEN op2H-A series
Normal
operating
mode
Muting only
Muting active
If the OSSDs switch off
unintentionally and
during active muting,
check the partial muting
configuration.
Override active
Override status
Activate the override
button to bridge OSSDs
to light
Override timing error
Check and repeat the
override activation
sequence.
Check the override
connections.
Lamp error
Check the lamp
connections and check
for any potential defects
on the lamp.
Error
information
OSSD error
Activate RESET.
If the problem should
persist, please contact
Pilz customer services.
Microprocessor error
Activate RESET.
If the problem should
persist, please contact
Pilz customer services.
Lens error
Activate RESET.
If the problem should
persist, please contact
Pilz customer services.
EDM error
Activate RESET.
Check the EDM feedback
line and the EDM
configuration.
Restart error
Check connection
RESTART
/RESET/REALIGN.
Communication error
Activate RESET.
Check the cascading
connection and check
that the terminator cap is
installed correctly.
BCM
Configuration
error
Perform basic
configuration again.
If the problem should
persist, please contact
Pilz customer services.
1003069-EN-03
51
