Safety
Operating Manual PMCprotego S12(C)
1002528EN03
9
3
Safety
3.1
Intended use
The safety card PMCprotego S12(C) is an expansion of the servo amplifier PMCprot
ego D. It is designed for use in safetyrelated applications.
It meets the requirements for safety functions in accordance with EN 6180052, with re
gard to safe motion monitoring.
The safety card meets the requirements of EN IEC 61508 up to SIL 3 and EN ISO 138491
up to PL e.
To achieve category SIL 3 or PL e, the operator must ensure that the function of the safe
pulse disabler is tested periodically, after 8 hours at the latest, by triggering safety functions
SS1 or STO:
}
By restarting after safety functions SS1 or STO have been triggered as a condition of
operation
or
}
By restarting after safety function SS1 has been triggered by the operator
INFORMATION
To test the safe pulse disabler through deliberate operator action, see the
section entitled "Operation", under "Testing the safe pulse disabler".
The following is deemed improper use:
}
Any component, technical or electrical modification to the servo amplifier
}
Use of the servo amplifier outside the areas described in this manual
}
Use of the servo amplifier outside the documented technical details (see chapter en
titled “Technical Details”)
Intended use includes making the installation and wiring EMCcompliant.
Intended use also includes compliance with the
}
Operating manual for the PMCprotego D
}
Online help for the configuration tool PASconfig SDrive.
INFORMATION
For the use of the safety card in a PMCprotego D, the approvals of the rel
evant servo amplifier apply (see Technical Details in the operating manual
of the servo amplifiers).
The safety card PMCprotego S12(C) from Version 1.0 may only be used in conjunction
with the following servo amplifiers:
}
PMCprotego D.01 from Version 1.1
}
PMCprotego D.03 from Version 1.1
}
PMCprotego D.06 from Version 1.1
