Safety
Operating Manual PMCprotego S12(C)
1002528EN03
11
Encoder type
Feedback type
(parameter
FBTYPE) in the
servo amplifier's
commissioning
software
Connection to
the servo ampli
fier
Status for opera
tion with safety
card
ROD 24V with W&S
16
X3
Enabled
ROD 5V with W&S
17
X1
Enabled
BiSS encoder 5 V digital
20
X1
Enabled
BiSS encoder 12 V digital
22
X1
Enabled
SSI
25
X1
Enabled
SSI Linear encoder
26
X1
Enabled
ROD 5V
27
X1
Enabled
EnDat 2.2 with 5 V
32
X1
Enabled
EnDat 2.2 with 12 V
34
X1
Enabled
3.1.3
Use of qualified personnel
The products may only be assembled, installed, programmed, commissioned, operated,
maintained and decommissioned by competent persons.
A competent person is someone who, because of their training, experience and current pro
fessional activity, has the specialist knowledge required to test, assess and operate the
work equipment, devices, systems, plant and machinery in accordance with the general
standards and guidelines for safety technology.
It is the company’s responsibility only to employ personnel who:
}
Are familiar with the basic regulations concerning health and safety / accident preven
tion
}
Have read and understood the information provided in this description under "Safety"
}
And have a good knowledge of the generic and specialist standards applicable to the
specific application.
3.1.4
Warranty and liability
All claims to warranty and liability will be rendered invalid if
}
The product was used contrary to the purpose for which it is intended
}
Damage can be attributed to not having followed the guidelines in the manual
}
Operating personnel are not suitably qualified
}
Any type of modification has been made (e.g. exchanging components on the PCB
boards, soldering work etc.).
3.1.5
Disposal
}
In safetyrelated applications, please comply with the mission time T
M
in the safetyre
lated characteristic data.
}
When decommissioning, please comply with local regulations regarding the disposal of
electronic devices (e.g. Electrical and Electronic Equipment Act).
