ARG 260 NC
- movable vice
locking handles
hydraulic cylinder of the movable jaw
3 - 8 mm
hydraulic cylinder of the movable jaw
vice handwheel
Use the scroll wheel of the vice to push the movable jaw to the distance of 3-8 mm from the material. The clamping stroke of the
hydraulic cylinder is 15 mm.
ARG 520 NC
-
The fixed and the movable vice
Both vices are fully ascendable. For cutting of very heavy and often uneven materials, e.g. forgings, the feeding vice is fitted with
a system that opens both jaws simultaneously.
3 - 8 mm
Release the locking handle and pull the hydraulic cylinder with moveable jaws up to the distance of 3-8 mm from the material. Lock
the handle. Correct setting of the clamping jaws prevents excessive retraction of the piston from the hydraulic cylinder. In case of
incorrect clamping, cylinder seal damage may occur, feeding time may extend and feeding accuracy may be influenced.
ARG 300, 330 NC -
The fixed and the movable vice
The moveable vice is designed as a so-called "floating vice" for accurate feed of uneven and rough materials.
fixed jaw
movable jaw
fixed jaw
movable jaw
fixed jaw
movable jaw
