The coolant tank cannot be removed from the machine base during the maintenance and cleaning. Access to it is facilitated through
the lid in the base.
Caution: Used coolant belongs to special waste category!
Our recommendations:
Regular cleaning and maintenance of the coolant increases the service life and functionality of the coolant
pump. If possible, use the coolants miscible with water, non-irritant to skin and with high protection against aging and corrosion. Min.
Check the volume of oil in the coolant at least once a week. Optimum lubrication increases cutting productivity. There is a barrier in
the coolant tank that separates the space for filtering impurities. This space should be cleaned during routine checks depending on
the kind of material to be cut.
6.4. Lubrication
Regular lubrication and cleaning extend the life and functionality of the machine. While making routine checks, make sure there is
sufficient grease on the vice friction surfaces. Observe lubrication of greasing points according to the lubrication plan for individual
machines within every 40 hours or so. The linear guides must be greased or oiled according to manufacturer's instructions. The first
lubrication with lithium soap-based grease class NGLI-2 is applied during the assembly. Spiral spring covers of the ball screw have to
be periodically cleaned from gross impurities and greased - if possible, with the oil spray W44T Turbo spray approx. every 20 hours.
Dense rosin oils are not suitable. Their usage can lead to blocking of the threads and breakage of the spring. By using unsuitable oils,
the warranty becomes invalid.
6.4.1. Lubrication points in ARG 260 CF-NC
When handling coolants, risks linked to hazardous substances cannot be avoided. Observe the regulations and
recommendations (operating instructions by professional associations or your company) related to safe
handling of coolants.
Correct cutting angles will be achieved when the bearing surfaces for the workpiece and the surfaces of gripping jaws are free from
metal chips or other impurities. In order to retain proper function of the machine, make sure that the space around moving parts of the
machine is free of wood chips. Should this prerequisite not be maintained, a great risk of machine damage arises. For the wood chip
removal, use of a spray gun is recommended.
Observe the instructions and recommendations concerning safe disposal of waste produced during
operation.
6.3. Coolant system cleaning
6.2. Removal/disposal of chips
