7
22. Screw nylon control horn linkage to the
control horn. The distance from the bottom
of the aileron to the center of the hole on
the nylon part should be about 28mm
(1-1/8”).
23. Prepare 3 full size servos for installation,
we recommend the Hitec HS-635.
24. Install the servo arms as shown in the
photo.
25. Locate the 2 long elevator pushrods.
26. Install 2-HS-635 Hitec servos into outer
mount locations with arms pointing toward
center of fuselage. (See Photo) A short
Phillips screwdriver is required.
27. Slide the elevator pushrods into position
and install each clevis into servo arm
about 25mm (1”) from the center.
28. We will come back to the rudder servo
installation in a few steps.
29. Locate the parts for the tailwheel
assembly.