23
118. Fit the windshield and attach either
with small screws or canopy glue.
119. Access to the radio system and the
batteries is through the operable doors.
120. In addition to flight batteries you will
need to supply your radio system with
power. Use an external BEC like the Jeti
JE512 combined with a 2-cell 2100-
2500mAh Lipo pack. The BEC can be set
to 6V output for stronger servo response.
121. Secure this system to the front of the
cabin with Velcro and cable ties.
122. Locate your radio receiver on the floor
of the cabin with easy access. 6” servo
extensions on the 2 aileron channels of
the receiver will make connecting the
ailerons easier.
123. Make sure to label them so that an
inadvertent misconnection is avoided.
124. Flight batteries are installed in the
inside of the motor box in the nose of the
aircraft. You will need to build a platform
on which to attach the batteries. The exact
dimensions of this will be determined by
your choice of batteries. Make sure that
they are secure before flight.
125. Two 6-cell 5000mAh Thunder Power
packs balanced our airplane without any
additional ballast.