19
90. Adjust the length of the inter connector so
that both upper and lower aileron are in
neutral position.
91. Connect and tighten lock nuts to secure.
92. Locate the tail brace wires and solder on
electrical ends as well as the 3-3mm allen
head screws and 3mm nylock nuts.
93. You will be soldering the ring electrical
connectors to the ends of the brace wires.
94. Pre-bend one of the solder-on connectors
as shown in the photo.
95. Solder the connector to the brace wire.
96. Adjust the length of the brace wire and
solder it in place with the connector held
with the bolt. (See photo)