5
7. Slide the servo extension through the wing
to the root.
8. Install servo mounting plate with small
sheet metal screws.
9. Untape aileron from main wing panel.
10. Locate CA hinges, four will be used for
each aileron.
11. Ailerons and their mating surface have
been pre-slotted for CA hinges.
12. Insert CA hinges to their centers in each
slot on aileron.
13. Fold the CA hinge sharply upward, This
will keep them in place when inserting the
hinges in the main wing panel.
14. Install the aileron into position on the main
wing panel. Make sure to check the gap at
the root of the aileron and the fit at the tip.
15. With the aileron tight against wing and
deflected downward, use 3 drops per
hinge of thin CA to assure strong bonds.
Use paper towel to remove any excess CA
before drying.