PicoPhone series – loudspeaking phones
Page
27
.
8.4.2 External microphone
Connection of external loudspeaker can be done on the reverse of the device. Use a 3,5 mm
stereojack. The microphone is dependent of the polarity, and therefore it is important to
connect correct polarity to correct connection.
If an external microphone is connected, this will always be enabled except for:
Internal speaker is chosen via switch input #3.
When recording of words/messages for auditive feedback and -messages.
8.5 Recycling
The following shall be done on Picomeds PicoPhone series when it shall be used by a new
user. If necessary, make a copy of this page, fill inn serial number, version and tick off the
points which are done with signature and date at each point, and file it as your routines
requires.
Serial number:
Check the equipment. Is there any physical damages, cracks etc in box or foil?
Check that foil is not damaged, that it is fastened all around the edges and that it not has
loosened from its surface.
Clean the device.
Ensure that all components are available, power supply, telephone wire and outdoor units.
Make a function check.
There has to be an IR-remote controller available for test. Equipment and transmitter has
to be programmed with the same IR-format.
Ensure that all functions are working properly and that the device works as expected on
commands from remote controller, keys on device and external switches.
Perform “programming – default setting” procedure as described in chapter 5.5. Signals,
voice messages, telephone numbers and other data will be deleted.
Store.
8.6 Technical data
Type
Picomed loudspeaking IR-controlled analogue telephone and
door phone.
Operate
Picomed IR-remote controller with 16 channels.
An other IR-remote controller with 16 channels.
Keypad for main functions.
External switches may be connected.
Power supply
Enclosed, 12 VDC, minimum 1,25 A.
Power consumption
< 250 mA internal consumption.
< 1,0 A output to control door lock/opener.
Temperature
Designed for indoor use, 0˚C to +40
C.
Measurements
LxWxH: 165 x 210 x 50 mm.
Weight
0,5 kg without power supply and cable.
Key size
20 x 12 mm oval.
Material in box
ABS, recyclable.
Plexiglas (Polycarbonate) in IR-glass.
Polyester in front foil.
Waste management
Dispose as electronic waste.
Developed and manufactured in Norway.
