PicoPhone series – loudspeaking phones
Page
21
.
device will also play back the word
“Empty”
. When passing the last channel (15) the
device will leave IR-training programming mode.
To delete all trained IR-signals, enter advanced programming mode and execute the
“deactivate and delete IR” command, or make a recycling to get the device back to default
settings. The device will leave IR-training on timeout.
5.5 Programming
– default setting
There is a 2-stage process to execute to get the device back to default settings. This sequence
is controlled by the keys on the device.
Step 1 restores all changeable parameters back to default settings.
Step 2 is a continuation of step 1, and if executed, all recorded speech will be deleted
(words in auditive feedback and voice messages).
Do as following:
1.
Press and hold the key for automatically answering function. Light indicator for function
will change as normal.
2.
Press door key once.
3.
Press 3 times on telephone key.
4.
Press 3 times on door key.
5.
Release the key for automatically answering function. Light indicator for function will
start triple flashing. You will hear “
Beep-Beep-Beep
” as a confirmation for a correct
entered mode.
6.
To start recycling: press the key for automatically answering function and restoring
process starts. If the key not is released at once, but pressed for 3 seconds, also step 2
(delete all recorded speech) will be executed. The speech deleting process lasts for 5
seconds. A long “
Beep
” will sound when the process are finished.
Maximum time for the points 1-5 is 8 seconds. Maximum time between the points 5-6 is 8
seconds.
When restoring the values, the following are done:
All telephone numbers in the telephone book will be deleted.
Redial memory will be deleted.
Volume level will be set to value = 3 for both telephone and door phone system.
Automatic answering function disabled.
All values which can be altered in advanced programming mode will be set to default.
Trained IR will be deleted.
6 Maintenance
Picomeds loudspeaking IR-controlled analogue telephone and door phone is developed to
work without any scheduled maintenance. The equipment should be cleaned when necessary.
Wipe the equipment with a slightly damp cloth or an antistatic cloth. Never use a dry cloth,
while this result in risk of static charges. It shall not be exposed for fluids in any way.
6.1 Outdoor use
The PicoPhone series is intended for indoor use.
