PicoPhone series – loudspeaking phones
Page
10
.
4.4 User modes
The PicoPhone series can operate in different modes. These are:
Ordinary use.
Programming – plain. Programming made only by use of an IR-remote controller. This
mode shall be used to save telephone numbers in the telephone book.
Programming – advanced. Gives access to advanced settings only. Intended to be used by
technicians when installing the device.
Programming – IR-training. Let the device teach IR-signals from foreign IR-remote
controllers. Make it possible to control it with other IR-remote controllers.
Programming – default/recycling. Restore all settings to default.
In chapter 3, an overview of the main functions is given on one page. These pages can be used
as a quick guide for the user.
4.5 Incoming call
The device gives a ringing signal to indicate an incoming call. You may hook off by the use
of the remote controller, key on device, external switch or by the help of the automatic
answering function if this is enabled. When the automatic answering function activates, there
will be given a warning-tune, and then the device hooks off after a predefined number of
ringing signals (the number can be changed in advanced programming mode).
4.5.1 Ringing sound
– volume
The volume of the ringing tone may be adjusted in 5 levels. If the unit shall be used only for
outgoing calls, or if there should be any other reason for not have the ringing sound be heard,
it is possible to disable it for the telephone and/or the door phone. If it is disabled, it will still
be possible to use all functions. Contact your technician to get this altered if there is any need
for it.
4.6 Outgoing call
By the help of a remote controller or external switches it is possible to make a phone call with
the PicoPhone or the PicoCombi. It will wait for the dialling tone before the telephone
number is transmitted. If the dialling tone not is possible to detect for the device, the number
will be transmitted after a predefined time. All numbers will be transmitted as DTMF.
The device can be programmed with a fixed prefix (i.e. “0”) to be used in combination with a
telephone switch board. If a prefix is enabled, the device will wait for dialling tone after the
prefix is transmitted. When the telephone book is used, the device will transmit the prefix
automatically.
4.7 Phone conversation
The telephone line will be active until:
The user disconnects (“hook on”) with the remote controller, key on the PicoPhone or the
PicoCombi, or an external switch.
The person who called you, hooks on.
If the conversation is started by the automatic answering function, it will be ended when
the predefined conversation time (programmable in advanced programming mode)
expires. In this case it will be given 4 warning tunes before disconnection.