PicoPhone series – loudspeaking phones
Page
15
.
for telephone and for the door phone. A light indicator will illuminate when the function is
enabled. Please refer to chapter 4.5, 4.7 and 4.8.3 for more information.
Be aware of the following: if this function is enabled, it is possible to call to the user and
listen to what happens in the room. If the device is used by a disabled person without the
capability to disable the function or to control the device him/herself, there can be a risk of
involuntary monitoring of the person. Please also observe that if the ringing sound is disabled
(chapter 4.5.1) there will only appear a short tune until the user is connected to an incoming
call.
4.13 Telephone book
The telephone book in PicoPhone and PicoCombi are able to:
Redial the last used telephone number up to 50 digits.
Store 50 telephone numbers with up to 50 digits each.
Telephone book numbers 1-3 can be activated by external keys 1-3.
Telephone book numbers 1-9 can be activated by one key press on the remote controller
by pressing one of the keys 1-9.
Telephone book numbers 1-50 can be activated by pressing “B nn” on the remote
controller where “nn” is the two digit number. See chapter 4.7.1.
The numbers in the telephone book will not be deleted if a power failure situation occurs.
Redial memory will be deleted if a power failure situation occur. In advanced programming
mode a prefix can be activated. This means that there is no need to save the prefix in all
numbers in the telephone book if it is activated once in advanced programming mode. A
pause (“F”) can be a part of a number in the telephone book. The device will wait a prede-
fined time before the number transmitting continues if “F” is a part of the telephone number.
4.14 Tone generation
The device generates tones as a response to user inputs. Generated tones will occur when:
Key press on device (also if key has no action in actual setting) except from when DTMF
are transmitted or when recorded speech are played back.
When a timeout occur after a “B” or “C” sequence in ordinary use.
When entering a programming mode.
When hook on is automatically executed.
4.15 Power failure
If a power failure come into being the PicoPhone series will go back to standby when the
power come back, without any operations on it. It will be disconnected from the telephone
line and the automatically answering function will have the same status as before the power
failure. It will not be possible to operate the equipment when there is a power failure or the
power supply is disconnected. Telephone numbers stored in the telephone book and all other
settings will be unchanged. The redial memory will be deleted.
4.16 Accessories
The following accessories are available:
External switches to control telephone line, door phone and phone book numbers 1-3.
Outdoor units for door phone.
External IR-sensors.
External loudspeaker.
