Rev. 01/2021
20
Controlling the Driver using a PLB-21
To control the driver with a PLB-21 it must be connected via the enclosed cable. The PLB-
21 will not work if the USB and the PLB-21 are connected at the same time.
When the PLB-21 is connected the first time to the driver the user is asked to download a
new driver. This must be confirmed with “yes” for working the PLB-21 properly.
Menu Structure
The following diagram shows the structure of the PLB-21 menu which affects the driver. All
entries are described in detail. All other menu entries are described in the PLB-21 manual.
For detailed instructions see the PLB-21 manual.
Menu root
-
Pulseparameter
o
Width
o
Reprate
o
Cur(int/ext)
-
Trigger
o
Mode
o
Edge
-
Config
o
Enable
o
Ex. Enable
o
Cur setpoint
-
Defaults
o
Def. pwron
o
Load defaults
o
Save defaults
-
Temperature
o
Dev. Off
o
Temp 1
o
Temp 2
o
Temp 3
-
Measurement
o
Uin
o
Udiode
o
IDiode
