PICOLAS LDP-C 120-40 NG, User Manual

Page: 29 / 40

Rev. 01/2021
28
Command Parameter Answer Description
gwidthmax -- pulse width in
µs Outputs the maximum pulse width
sreprate repetition rate
in Hz repetition rate
in Hz Sets the repetition rate to the
indicated value
greprate -- repetition rate
in Hz Outputs the present repetition rate
grepratemin -- repetition rate
in Hz Outputs the min. repetition rate
grepratemax -- repetition rate
in Hz Outputs the max. repetition rate
strgmode 0 .. 2 0 .. 2 Sets the trigger mode to the
indicated value:
0: external trigger input
1: internal trigger
2: cw mode
gtrgmode -- 0 .. 2 Outputs the current trigger mode
gtempoff -- -- Outputs the shutdown temperature
gtempmax -- -- Outputs the shutdown temperature
gtemphys -- -- Outputs the temperature hysterere, at
which the driver can be re-enabled
after shutdown
gtempwrn -- -- Outputs the warning temperature at
which the driver will show a
warning
gtemp -- -- Outputs the actual temperature
enautoload -- -- Enables the automatic loading of
default values on power-on
disautoload -- -- Disables the automatic loading of
default values on power-on
on -- -- Enables the current output.
Internally ANDed with the enable
signal
off -- -- Disables the current output.
Internally ANDed with the enable
signal
glstat -- -- Outputs the content of the LSTAT
register.
slstat 32 bit number 32 bit number Sets the LSTAT register to the given
value. Outputs the new value.