PI L-402 Series, User Manual, Page: 23 / 43

6 Start-Up
L-402 Mniature Stage MP164E Version: 1.2.0 19
6.1 General Notes on Start-Up
CAUTION
Risk of crushing by moving parts!
There is a risk of minor injury from crushing between the moving parts of the L-402 or the load
and a fixed part or obstacle.

Use protective structures to keep limbs away from areas in which they could be caught by
moving parts.

Observe the safety distances in accordance with DIN EN ISO 13857 when installing
protective structures.
NOTICE
Damage due to collisions!
Collisions can damage the L-402, the load to be moved, and the surroundings.

Make sure that no collisions are possible between the L-402, the load to be moved, and the
surroundings in the motion range of the stage.

Do not place any objects in areas where they can be caught by moving parts.

Stop the motion immediately if a controller malfunction occurs.

If possible, adapt the travel range limits of your mechanical system in the software that
you use for commanding the motion.
NOTICE
Damage if an incorrect controller is connected!
Connecting the L-402 to an unsuitable controller can cause damage to the stage or
controller.

Only connect the L-402 to a controller of the recommended type (p. 7).
NOTICE
Operating voltage excessively high or incorrectly connected!
Operating voltages that are excessively high or incorrectly connected can cause damage to
the L-402.

Do not exceed the operating voltage range (p. 28) that is specified for the L-402.

Only operate the L-402 when the operating voltage is properly connected; see "Pin
Assignment" (p. 33).
6 Start-Up