PI L-402 Series, User Manual, Page: 21 / 43

5 Installation
L-402 Mniature Stage MP164E Version: 1.2.0 17
5.4 Affixing the Load to the L-402
NOTICE
Impermissibly high load on the L-402!
An impermissible high load impairs the motion of the motion platform and can damage the L-
402.

When considering the mass and mounting method of the load, pay attention to the
specified maximum permissible forces, that are permitted to act on the motion platform
(p. 27).
Requirements

You have read and understood the general notes on installation (p. 11).

You have mounted the L-402 properly onto a surface (p. 12).

The L-402 is not connected to the controller.

You have prepared the load so that it can be affixed to the mounting holes on the
motion platform (p.30):
−
The distance between the center of gravity of the load and the center of the motion
platform is as small as possible in all directions.
−
At least two points are provided for affixing the load to the motion platform
(ideally: three attachment points).
Tools and accessories

At least 2 screws of suitable length. Options:
− M2 screws
− M2.5 screws

Suitable tool for tightening the screws
Affixing the load
1. Align the load so that the selected mounting holes in the motion platform can be used
to affix it.
2. Use the screws to affix the load to the selected mounting holes in the motion platform.
3. Check that the load is affixed firmly to the motion platform of the L-402.