PI L-402 Series, User Manual, Page: 18 / 43

5 Installation
14 Version: 1.2.0 MP164E L-402 Mniature Stage
Mounting the L-402 onto a surface - mounting on the bottom
1. Align the L-402 on the surface so that the corresponding mounting holes in the stage
and the surface overlap.
2. If you use locating pins to align the stage:
a.
Insert the locating pins into the respective holes in the surface.
b. Place the L-402 on the surface so that the locating pins are inserted into the
corresponding locating holes on the other side.
3. Allow access to the mounting holes in the base body of the L-402. Possible measures:
−
Temporary start-up of the stage and commanding the platform to a suitable
position
−
Moving the platform manually (ü. Fehler! Textmarke nicht definiert. )
4. Completely screw in the screws into all mounting holes.
5. Repeat steps 2 to 4 for the concealed mounting hole.
6. Check that the L-402 is affixed firmly to the surface.
Mounting the L-402 onto a surface - mounting on the front
Figure 6: Position of the locating holes (bright/white arrows) and the mounting holes (dark/blue arrows)
on the front
1. If necessary: Move the platform just enough to allow the screws or nuts to be mounted
in the mounting holes (see figure) with the corresponding tool. Possible measures:
−
Temporary start-up of the stage and commanding the platform to a suitable
position
−
Moving the platform manually (p.
Fehler! Textmarke nicht definiert.
)
2. Align the L-402 on the surface so that the corresponding mounting holes in the stage
and the surface overlap.
3. If you use locating pins to align the L-402:
a.
Insert the locating pins into the respective holes in the surface.