5 Quick Start
C-863 Mercury Controller
MS205Equ
Version: 2.0.0
25
After clicking
OK
the
Start up controller
window goes to the
Start up axes
step.
9. In the
Start up axes
step, execute the reference move for the axis so that the
controller knows the absolute axis position:
−
If you want to start the reference move to the reference point switch, click
on
Ref. switch
.
−
If you want to start the reference move to the negative limit switch, click
on
Neg. limit
.
−
If you want to start the reference move to the positive limit switch, click on
Pos. limit
.
If a warning message appears indicating that the servo mode is switched off:
−
Switch on the servo mode by clicking on the
Switch on servo
button.
