2 Safety
C-863 Mercury Controller
MS205Equ
Version: 2.0.0
7
In this Chapter
Intended Use ................................................................................................................. 7
General Safety Instructions ........................................................................................... 7
2.1 Intended Use
The C-863 is a laboratory device as defined by DIN EN 61010. It is intended to be
used in interior spaces and in an environment which is free of dirt, oil, and lubricants.
Appropriate to its design, the C-863 is intended for the operation of PI stages
equipped with DC motors or voice coil drives.
The C-863 is intended for closed-loop operation with incremental position sensors. In
addition, it can read and process the reference point and limit switch signals from the
stage connected.
The C-863 may only be used in compliance with the technical specifications and
instructions in this user manual. The user is responsible for process validation.
2.2 General Safety Instructions
The C-863 is built according to state-of-the-art technology and recognized safety
standards. Improper use can result in personal injury and/or damage to the C-863.
Only use the C-863 for its intended purpose, and only use it if it is in a good
working order.
Read the user manual.
Immediately eliminate any faults and malfunctions that are likely to affect
safety.
The operator is responsible for the correct installation and operation of the C-863.
Install the C-863 near the power source so that the power plug can be quickly
and easily disconnected from the mains.
Use the supplied components (power supply, adapter and power cord (p. 16))
to connect the C-863 to the power source.
2
Safety
